Best Exhaust Manifold Paint

Finding the Best Exhaust Manifold Paint. We have listed the top collection of Exhaust Manifold Paint Available in the Market. check out the list below.

Best Exhaust Manifold Paint

POR-15 High Temperature Paint - Manifold Gray - 15 fl. Oz. - High Heat Resistant Paint - Withstands Temperatures Of 1200°F | Weather & Moisture Resistant

$24.60  in stock
26 new from $24.60
Free shipping
Amazon.com
as of January 12, 2022 6:31 pm

Features

  • ✅ WHY CHOOSE POR-15 HIGH TEMPERATURE PAINT? – POR-15 High Temp paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling.
  • ✅ TOUGH & DURABLE - Renew and protect metal surfaces subject to extreme heat. Our high temperature paint provides a tough corrosion resistant finish that protects against weather, salt, and moisture.
  • ✅ APPLICATION - All surfaces must be clean and free of all dirt, loose rust, oil, grease, wax, soap, loose paint & any other matter. Paint all bare areas with two coats. Glossy surfaces should be roughened with 320 grit sandpaper before recoating. Allow POR-15 High Temp Coating to cure for 24 hours on the surface before temperature is raised above 300°F for full cure.
  • ✅ WHEN DO I NEED THIS? - POR-15 Heat Resistant Paint is the most uniform heat-resistant coating available anywhere and will maintain rich, brilliant colors without burning off or discoloring. Can be used on all cars, domestic or foreign. Meets or exceeds properties and requirements of MIL-C-13370.
  • ✅ OUR SATISFACTION COMMITMENT – At POR-15 we strive to bring the ultimate in rust prevention. Known for the unbeatable 3-step stop rust system, POR-15 is trusted by DIY & Professionals. We are committed to innovation, quality control, and excellent customer service.

POR-15 High Temperature Paint - Gray - 8 fl. Oz. - High Heat Resistant Paint - Withstands Temperatures Of 1200°F | Weather & Moisture Resistant

$19.50  in stock
12 new from $18.93
Free shipping
Amazon.com
as of January 12, 2022 6:31 pm

Features

  • ✅ WHY CHOOSE POR-15 HIGH TEMPERATURE PAINT? – POR-15 High Temp paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling.
  • ✅ TOUGH & DURABLE - Renew and protect metal surfaces subject to extreme heat. Our high temperature paint provides a tough corrosion resistant finish that protects against weather, salt, and moisture.
  • ✅ APPLICATION - All surfaces must be clean and free of all dirt, loose rust, oil, grease, wax, soap, loose paint & any other matter. Paint all bare areas with two coats. Glossy surfaces should be roughened with 320 grit sandpaper before recoating. Allow POR-15 High Temp Coating to cure for 24 hours on the surface before temperature is raised above 300°F for full cure.
  • ✅ WHEN DO I NEED THIS? - POR-15 Heat Resistant Paint is the most uniform heat-resistant coating available anywhere and will maintain rich, brilliant colors without burning off or discoloring. Can be used on all cars, domestic or foreign. Meets or exceeds properties and requirements of MIL-C-13370.
  • ✅ OUR SATISFACTION COMMITMENT – At POR-15 we strive to bring the ultimate in rust prevention. Known for the unbeatable 3-step stop rust system, POR-15 is trusted by DIY & Professionals. We are committed to innovation, quality control, and excellent customer service.

VHT Flameproof Coating Very High Heat Nu-Cast™ Cast Iron

$15.81  in stock
26 new from $12.22
Free shipping
Amazon.com
as of January 12, 2022 6:31 pm

Features

  • Flame proof coating extends life of high heat surfaces
  • Matte finish ceramic silicone base widely used on automotive exhaust
  • Best when used with primer color paint and clear coat process
  • Withstands temperatures up to 2000 degrees when cured properly

Rust-Oleum 248904 Automotive High Heat Spray Paint, 12 Ounce (Pack of 1), Flat Aluminum

$10.70
$9.24
 in stock
4 new from $9.24
Free shipping
Amazon.com
as of January 12, 2022 6:31 pm

Features

  • Ideal for use on automotive parts and surfaces subject to intermittent high heat up to 2000°F
  • Tough enamel features Stops Rust formula to prevent corrosion and rust with ultimate protection
  • Dries to touch in 30 minutes, covers up to 10 sq. ft. per can
  • Durable, long lasting coating protects against grease, oil, gas, salt, rust, humidity and other solvents
  • Creates a smooth, flat protective finish to renew the look of your car or truck

Eastwood High Temperature Resistant Factory Gray Coating Aerosol 11.75oz

$24.99  in stock
Amazon.com
as of January 12, 2022 6:31 pm

Features

  • Replicate The Look Of Cast Iron On Manifolds
  • Temperature Resistant Up To 1400 Degrees
  • Easy Brush Or Spray-On Application
  • Each Can Is Sufficient To Coat 2 Standard Cast Iron Manifolds Or About 6 Sq Ft
  • 2 Cans Recommended For Header Systems

VHT SP117 FlameProof Coating Flat Aluminum Paint Can - 11 oz. - 2 Pack

$29.99  in stock
3 new from $29.99
Amazon.com
as of January 12, 2022 6:31 pm

Features

  • Headers, Exhaust Systems, Piston Domes, Inside Heads
  • VHT provides a high-performance coating system for the ultimate in protection and quality
  • 2 PACK

VHT FLAMEPROOF Coating

$15.28  in stock
18 new from $11.46
Free shipping
Amazon.com
as of January 12, 2022 6:31 pm

Features

  • 1300°F-2000°F (704°C-1093°C) Intermittent
  • Curing time required and can be done on or off vehicle
  • Headers, Exhaust Systems, Piston Domes, Inside Heads
  • Country of origin: United States

Eastwood Durable Resistant Matte Silver Finish Coating Aerosol Pints 11.75 Oz

$24.99  in stock
Amazon.com
as of January 12, 2022 6:31 pm

Features

  • Provides A Brilliant Matte Silver Sheen
  • Temperature Resistant Up To 1400 Degrees
  • "Easy Brush Or Spray-On Application, Aerosol covers approximately 6 sq ft "
  • Each Can Is Sufficient To Coat 2 Standard Cast Iron Manifolds Or About 6 Sq Ft
  • 2 Cans Recommended For Header Systems, One pint covers approximately 12 sq ft

POR 15 Factory Manifold Gray FMGH 44216 8 oz

$31.91  in stock
7 new from $22.06
Amazon.com
as of January 12, 2022 6:31 pm

Features

Part NumberFMGH 44216

Eastwood High Temperature Resistant Satin Black Coating Aerosol 11.75 oz

$23.99  in stock
Amazon.com
as of January 12, 2022 6:31 pm

Features

  • Produces A Custom Look For Manifolds, Headers
  • Temperature Resistant Up To 1400 Degrees
  • Easy Brush Or Spray-On Application
  • Each Can Is Sufficient To Coat 2 Standard Cast Iron Manifolds Or About 6 Sq Ft
  • 2 Cans Recommended For Header Systems

Leave a Comment