Best Straight Edge Clamp

Finding the Best Straight Edge Clamp. We have listed the top collection of Straight Edge Clamp Available in the Market. check out the list below.

Best Straight Edge Clamp

ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)

$58.98  in stock
2 new from $58.98
1 used from $47.99
Free shipping
Amazon.com
as of January 2, 2022 6:43 am

Features

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
  • The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!

ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots (All 3 Clamps 24, 36 and 50 inch)

$94.92  in stock
2 new from $94.92
Free shipping
Amazon.com
as of January 2, 2022 6:43 am

Features

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
  • The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!

Bora 100-Inch NGX Clamp Edge, Straight Cut Guide For Circular Saws Includes 50-Inch Clamp Edge & 50-Inch Extension For 100-Inch Cutting Length, 544100

$84.99
$69.99
 in stock
6 new from $69.99
Free shipping
Amazon.com
as of January 2, 2022 6:43 am

Features

  • Clamping end moves with handle for easy adjustability from one side
  • Locking handle grabs work surfaces for a secure grip that won’t budge
  • Made of heavy-gauge, rigid aluminum for extreme durability
  • Use with circular saws, routers, Jig saws, and other portable power tools
  • Includes Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors

Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking, Contractors, Carpenters and DIY, Guide for Circular Saws, 100 Inch Cutting Length, 545100

$99.00
$74.99
 in stock
5 new from $74.99
Free shipping
Amazon.com
as of January 2, 2022 6:43 am

Features

  • GET IT STRAIGHT EVERY TIME: This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. It’s long 100-inch length allows you to saw with precision and skill
  • LOCKED IN: The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge while you cut
  • MAKE MEASURING EASY: The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy
  • SUITED FOR YOUR NEEDS: The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts
  • ADDITONAL ACCESSORIES: The BORA WTX Saw Guide System has additional accessories include the Saw Plate, Track Clamps for cutting any angle, and the Router Guide

BORA 5-Piece NGX Clamp Edge System Set For Making Precision Cuts, Includes 50-inch Clamp Edge, 50-inch Extension, Pro Saw Plate, Track Clamps, Non-Chip Strip, 544500

$199.00
$159.99
 in stock
4 new from $159.99
Free shipping
Amazon.com
as of January 2, 2022 6:43 am

Features

  • TRACK SAW PRECISION: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time
  • 100” OF CUTTING CAPACITY: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension.
  • STOP THE GUESSWORK: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts.
  • REDUCE TEAR OUT: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish
  • CUT ANY ANGLE: Attach the additional two Track Clamps to the Clamp Edge for pro level angle cutting capability

BORA 50” NGX Clamp Edge, Straight Cut Guide for Circular Saws, Easy to Use, Great for Cross-Cutting Plywood Sheets and Routing Dados, 544050

$59.00
$49.00
 in stock
8 new from $49.00
1 used from $45.08
Free shipping
Amazon.com
as of January 2, 2022 6:43 am

Features

  • CIRCULAR SAW GUIDE FOR LARGE SHEETS: The BORA clamp edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw
  • CLAMPS FIRMLY: This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project
  • EXTREME DURABILITY: Made of heavy-gauge, extruded aluminum it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use
  • USE WITH ANY CIRCULAR SAW: This guide is compatible with any brand of circular saw, not just BORA tools. Use it with circular saws, routers, and jigsaws. For big projects, easily increase the length up to 100 in. by adding the BORA NGX 50-inch aluminum extension.
  • PREMIUM QUALITY: The BORA clamp edge straight cut guide is designed for heavy-duty use in the toughest conditions. Its durable construction and precision engineering ensure an accurate cut every time.

Kreg Straight Edge Guide XL-8 Ft

$99.00  in stock
9 new from $99.00
Free shipping
Amazon.com
as of January 2, 2022 6:43 am

Features

  • Crosscut and rip cut material up to 8 feet (244cm)
  • Aluminum guide rail leads cuts precisely along a straight line
  • Cutline indicators help position cuts perfectly
  • Built-in clamping with GripMaxx secures rail to material
  • Works with left- and right-blade circular saws, as well as some jigsaws and trim routers

BORA WTX Ruled Clamp Edge Saw Guide, 50 Inch Length Rail for Circular Saws, Cutting Track for Woodworking, Contractors, DIY, 545050

$54.99  in stock
7 new from $54.99
Free shipping
Amazon.com
as of January 2, 2022 6:43 am

Features

  • TIME SAVER: The BORA WTX Ruled Clamp Edge Saw Guide makes it quick and easy to achieve straight, precise cuts when cutting plywood sheets or MDF with a circular saw, jigsaw, or router
  • FAST SET-UP: Adjust the gripping clamp end to the desired length, lock it in place, and start cutting
  • LONG CUTTING LENGTH: This 50” guide rail is long enough for large and wide sheet material and can be used with all types of saws. Easily increase the length up to 100 inches by adding the BORA NGX 50-inch aluminum extension sold separately.
  • RULED STRAIGHT EDGE: The top edge of the clamp includes a ruler imprint with both metric and imperial measurements to guarantee your cuts are always the right size
  • EXTREME DURABILITY: Made of heavy-gauge, extruded aluminum it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use

BORA 4-pc WTX Deluxe Set, Includes: 24-Inch & 50-Inch WTX Clamp Edges, 50-Inch Extension, Saw Plate -545410

 in stock
Amazon.com
as of January 2, 2022 6:43 am

Features

  • Includes 24-inch & 50-inch WTX Clamp Edges, 50" Extension with connectors, Saw Plate
  • WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability
  • Adjustable channel on saw plate fits a wide variety of straight edges up to 3.5” wide
  • Fits right- and left-handed circular saws
  • Ruled extrusion allows for easy measurements

Kreg Straight Edge Guide-4 Ft

$49.00  in stock
5 new from $49.00
Amazon.com
as of January 2, 2022 6:43 am

Features

  • Crosscut and rip cut up to 4 feet (122cm) in sheet goods
  • Aluminum guide rail leads cuts precisely along a straight line
  • Cutline indicators help position cuts perfectly
  • Built-in clamping with GripMaxx secures rail to material
  • Works with left- and right-blade circular saws, as well as some jigsaws and trim routers

Leave a Comment